Creating different views of 2d drawing in zw3d
2D drawings are the main standard of machining and checking parts. It's very important for today's manufacturing to have quality part information to go by.
* Automatically generate 2D drawing from solid and surface models
* Automatically update the 2D drawing if the part has been changed
* Automatically create standard and custom drawing views as required.
Below are some examples.
http://www.zwcadclub.com/uploadfile/images/20110427-Toolbar.jpg
Full section view: Can be created on both simple and complex shapes.
Example 1: Full section view with a single section planes.
http://www.zwcadclub.com/uploadfile/images/20110427-Example1.jpg
Example 2: Full section view with multiple section planes.
http://www.zwcadclub.com/uploadfile/images/20110427-Example2.jpg
Example 3: Named Section Curves in 3D modeling.
http://www.zwcadclub.com/uploadfile/images/20110427-Example3Command.jpg
In 2D a sheet,define the type of section view as named 3D and another one named Bent.
The one named 3D is used when sketch lines between 0 and 90 degrees are used. See following image.
Bent is used when sketch lines are beyond 90 degrees.
http://www.zwcadclub.com/uploadfile/images/20110427-Example3.jpg
Example 4: Two intersecting section plans to define the whole section
Note: The intersection line of two section plans must coincide with the axis of rotational part.
http://www.zwcadclub.com/uploadfile/images/20110427-Example4.jpg
Detail view: It is used to enhance details of the drawing. Use this command to create circular and rectangular detail views from other layout views.
http://www.zwcadclub.com/uploadfile/images/20110427-DetailView.jpg
Broken view: Used to create a gap or break in a view using a pair of broken lines. This makes it possible to display a large part within a drawing view that it normally it would not fit inside of.
http://www.zwcadclub.com/uploadfile/images/20110427-BrokenView1.jpg
http://www.zwcadclub.com/uploadfile/images/20110427-BrokenView2.jpg
You will appreciate the ease with which you can create the many types of views in ZW3D.
About ZW3D
ZW3D, The All-in-one CAD/CAM, was included into ZWSOFT's product portfolio in 2010. As the successor of VX CAD/CAM, ZW3D provides ease-of-use, performance, and all-in-one capability. The brand new software can extend enterprise-level mechanical design and engineering capabilities to the desktop at a fraction of the cost of other comparable systems. Experience ZW3D 2010, where the only limit is your imagination. Please go to http://zw3d.zwcad.org/ to download a free 30-day trial today.
Article Source: Messaggiamo.Com
Related:
» Seo Elite: New Seo Software!» AntiSpywareBOT
» Reverse Mobile
» Error Nuker
Webmaster Get Html Code
Add this article to your website now!
Webmaster Submit your Articles
No registration required! Fill in the form and your article is in the Messaggiamo.Com Directory!
